|
|
 |
 |
MP402
pressure transmitter- 4-20 mA o/p: |
|
|
|
 |
|
GENERAL
Model MP402 is a miniature,
low cost, general use pressure sensor that automatically compensates for line resistance and power supply changes.
It is made of corrosive resistant titanium (6AL4V) and utilizes high reliability bulk type semi-conductor strain gages bonded directly to the inside surface of the machined diaphragm.
|
Model MP402
4-20 mA O/P
|
|
|
 |
|
|
|
|
Absolute or sealed reference sensors are available as an option. The hermetic header is located just behind the strain gage diaphragm section of the sensor, sealing the sensitive gages to an inert environment which dramatically increases stability and reliability.
Special temperature or pressure ranges and high-vibration resistant options
including long term stability versions are available.
APPLICATIONS
- TEST &
MEASUREMENT EQUIPMENT
- PRODUCTION
EQUIPMENT & CONTROLS
- ENERGY CONTROLS
- LABORATORY
INSTRUMENTS & EQUIPMENT
- LIQUID LEVEL
- CALIBRATION
EQUIPMENT
MECHANICAL
| Standard Pressure Ranges
|
25, 50, 100, 200, 300, 500, 1K, 2K, 3K, 5K, 7K, 10K PSI
|
| Non Standard Pressure Ranges
|
5, 10, 15, 20, 30, 150 PSI
|
| Other ranges possible
|
Consult Factory
|
| Over Pressure (No change out of spec.)
|
2.0x Range
|
| Usable Pressure (Small change in balance)
|
3.0x Range
|
| Burst Pressure
|
6.0x Range
|
PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
|
A
|
B
|
C
|
D
|
Units
|
| Balance (Zero)
|
4.00
±0.50 |
4.00
±0.30 |
4.00
±0.20 |
4.00
±0.20 |
mA |
| Full Scale Sensitivity
|
16.00
±0.50 |
16.00
±0.30 |
16.00
±0.20 |
16.00
±0.20 |
mA
|
| Static Error Band
|
±0.50
|
±0.25
|
±0.25
|
±0.25
|
%FS
|
| Thermal Balance (Zero) Shift
|
±0.02
|
±0.01
|
±0.01
|
±0.005
|
%FS/°F
|
| Thermal Sensitivity Shift
|
±0.02
|
±0.01
|
±0.01
|
±0.005
|
%FS/°F
|
| Long Term Stability
|
±2.00
|
±2.00
|
±2.00
|
±2.00
|
%FS/year
|
*BFSL=Best Fit Straight Line
ENVIRONMENTAL
| Storage and Operating Temperature
|
0° -180°F
|
| Compensated Temperature Range
|
30° - 130°F
|
| Acceleration (Consult factory for high vibration options)
|
100gÕs any axis
|
| Media Compatibility (wetted surface)
|
Liquids & Gases compatible with Titanium 6AL4V
|
| Other Temperature Compensated Ranges
|
Consult Factory
|
ELECTRICAL
| Input Voltage (Standard)
|
24 VDC
|
| Input Load Resistance (Standard)
|
500 Ohms
|
| Maximum Input Voltage
|
30 V for short periods
|
| Insulation Resistance Minimum
|
50 MOhms @ 50 VDC
|
|
|
 |
|
|
|
|
|
Toll
Free: (888) 738-0039
E-mail: a-kast@on.aibn.com
Copyright © 2000 A-KAST
Measurements & Control Limited
|
|
