|
|
 |
MP4X Flush Mnt.
Pressure Transducer |
|
 |
|
|
 |
|
|
|
|
Flush
Mount
Pressure Transducer
|
|
|
GENERAL
Micron's
Models MP40 and MP42 are flush mountable, miniature, low cost, general
use pressure transducers. These transducers are made of corrosive
resistant titanium (6AL4V). They utilize high reliability bulk type
semi-conductor strain gages bonded directly to the inside surface of the
machined diaphragm.
Titanium hermetic
headers permit offering the MP40 series with absolute or sealed
reference options. The hermetic header is located just behind the strain
gage diaphragm section of the sensor. Sealing the sensitive gages to an
inert environment dramatically increases stability and reliability. Long
term stability versions are available. High vibration options are also
available.
|
|
|
|
|
 |
|
|
|
|
|
|
|
APPLICATIONS
- TEST
& MEASUREMENT EQUIPMENT
- PRODUCTION
EQUIPMENT & CONTROLS
- ENERGY
CONTROLS
- LABORATORY
INSTRUMENTS & EQUIPMENT
- LIQUID
LEVEL
- CALIBRATION
EQUIPMENT
MECHANICAL
| Standard Pressure Ranges |
25, 50, 100, 200, 300, 500, 1K, 2K, 3K, 5K,
7K psi |
| Non Standard Pressure Ranges |
15, 20, 30, 35, 40, 75, 150, 250, 400, 10K
psi |
| Other ranges possible |
Consult Factory |
| Over Pressure (No change out of spec.) |
2.0x Range |
| Usable Pressure (Small change in balance) |
3.0x Range |
| Burst Pressure |
6.0x Range |
PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
Specification Options
| |
A |
B |
C |
D |
Units |
| Balance (Zero) |
±3.00 |
±2.00 |
±2.00 |
±2.00 |
mV |
| Full Scale Sensitivity (MP40) |
20.0±2.00 |
20.0±2.00 |
20.0±2.00 |
20.0±2.00 |
mV/V |
| Full Scale Sensitivity (MP42) |
27.0±1.40 |
27.0±1.40 |
27.0±1.40 |
27.0±1.40 |
mV/mA |
| Static Error Band |
±0.50 |
±0.25 |
±0.25 |
±0.25 |
%FS BFSL* |
| Thermal Balance (Zero) Shift |
±0.02 |
±0.02 |
±0.01 |
±0.005 |
%FS/°F |
| Thermal Sensitivity Shift |
±0.02 |
±0.02 |
±0.01 |
±0.005 |
%FS/°F |
*BFSL=Best Fit Straight Line
ENVIRONMENTAL
| Storage and Operating Temperature |
0° -180°F |
| Compensated Temperature Range |
30° - 130°F |
| Other Temperature Compensated Ranges |
Consult Factory |
| Acceleration |
100g's any axis (Consult factory for high
vibration options) |
| Media Compatibility (wetted surface) |
Liquids & Gases compatible with Titanium
6AL4V |
ELECTRICAL
| Input Constant Voltage Excited (MP40) |
5.0 Volts DC or AC |
| Input Constant Current Excited (MP42) |
4.0 mA DC or AC |
| Maximum Voltage |
30 V for short periods |
| Input Resistance (Nominal) |
1400 ± 400 Ohms(MP40); 725 ± 200 Ohms(MP42) |
| Output Resistance (Nominal) |
850 ± 200 Ohms (MP40); 600 ± 150 Ohms
(MP42) |
| Insulation Resistance Minimum |
50 MOhms @ 50 VDC |
|
|
|
 |
|
|
|
|
|
Toll
Free: (888) 738-0039
E-mail: a-kast@on.aibn.com
Copyright © 2000 A-KAST
Measurements & Control Limited
|
|
