|
|
 |
 |
mPT402 Current and Temp. O/p
Sensors: |
|
|
|
 |
|
GENERAL
Micron's Model MPT402 is a miniature dual pressure and temperature sensor that automatically compensates for line resistance and power supply changes.
It is made of corrosive resistant titanium (6AL4V) and utilizes high reliability bulk type semi-conductor strain gages bonded directly to the inside surface of the machined diaphragm.
The temperature is measured from the inside surface of the diaphragm and is not pressure or strain sensitive.
Absolute or sealed reference sensors are available as an option. The hermetic header is located just behind the strain gage diaphragm section of the sensor, sealing the sensitive gages to an inert environment which dramatically increases stability and reliability.
|
|
Model MPT402 4-20 mA
Output
|
|
|
|
APPLICATIONS
-
TEST & MEASUREMENT EQUIPMENT
-
PRODUCTION EQUIPMENT & CONTROLS
-
ENERGY CONTROLS
-
LABORATORY INSTRUMENTS & EQUIPMENT
-
LIQUID LEVEL
-
CALIBRATION EQUIPMENT
|
|
|
|
|
|
|
|
MECHANICAL
| Standard Temperature Ranges
|
30 °F - 130 °F
|
| Standard Pressure Ranges
|
25, 50, 100, 200, 300, 500, 1K, 2K, 3K, 5K, 7K, 10K PSI
|
| Non Standard Pressure Ranges
|
5, 10, 15, 20, 30, 150 PSI
|
| Other ranges possible
|
Consult Factory
|
| Over Pressure (No change out of spec.)
|
2.0x Range
|
| Usable Pressure (Small change in balance)
|
3.0x Range
|
| Burst Pressure
|
6.0x Range
|
PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
|
A
|
B
|
C
|
D |
Units |
|
Balance (Zero)
|
4.00
±0.50 |
4.00
±0.30 |
4.00
±0.20 |
4.00
±0.20 |
mA |
|
Full Scale Sensitivity
|
16.00
±0.50 |
16.00
±0.30 |
16.00
±0.20 |
16.00
±0.20 |
mA |
|
Output at
30 °F |
4.00
±0.50 |
4.00
±0.30 |
4.00
±0.20 |
4.00
±0.20 |
mA |
|
Output at 130 °F
|
20.00
±0.50 |
20.00
±0.30 |
20.00
±0.20 |
20.00
±0.20 |
mA |
|
Static Error Band
|
±0.50
|
±0.25
|
±0.25
|
±0.25
|
%FS |
|
Thermal Balance (Zero) Shift
|
±0.02
|
±0.01
|
±0.01
|
±0.005
|
%FS/°F
|
|
Thermal Sensitivity Shift
|
±0.02
|
±0.01
|
±0.01
|
±0.005
|
%FS/°F
|
*BFSL=Best Fit Straight Line
ENVIRONMENTAL
| Storage and Operating Temperature
|
0° -180°F
|
| Compensated Temperature Range
|
30° - 130°F
|
| Acceleration (Consult factory for high vibration options)
|
100gÕs any axis
|
| Media Compatibility (wetted surface)
|
Liquids & Gases compatible with Titanium 6AL4V
|
| Other Temperature Compensated Ranges
|
Consult Factory
|
ELECTRICAL
| Input Voltage (Standard)
|
24 VDC
|
| Input Load Resistance (Standard)
|
RL = 500 Ohms
|
| Maximum Input Voltage
|
30 V for short periods
|
| Insulation Resistance Minimum
|
50 MOhms @ 50 VDC
|
|
|
 |
|
|
|
|
|
Toll
Free: (888) 738-0039
E-mail: a-kast@on.aibn.com
Copyright © 2000 A-KAST
Measurements & Control Limited
|
|
