|
|
 |
 |
MPT502 pressure sensor with 4 - 20 ma O/p: |
|
|
|
|
|
|
|
|
 |
|
GENERAL
Micron's Model
MPT502 is a miniature, low cost, general use pressure sensor that automatically compensates for line resistance and power supply changes.
It is made of corrosive resistant titanium (6AL4V) and utilizes high reliability bulk type semiconductor strain gages bonded directly to the inside surface of the machined diaphragm.
Pressure on the diaphragm is applied through the hole in the 10-32 threaded nose which is converted to a signal directly proportional to the pressure.
Absolute or sealed reference sensors are available as an option. The hermetic header is located just behind the strain gage diaphragm section of the sensor, sealing the sensitive gages to an inert environment which dramatically increases stability and reliability.
|
|
Model MPT502- 4-20 mA Output
|
|
|
APPLICATIONS
-
TEST & MEASUREMENT EQUIPMENT
-
PRODUCTION EQUIPMENT & CONTROLS
-
ENERGY CONTROLS
-
LABORATORY INSTRUMENTS & EQUIPMENT
-
LIQUID LEVEL
|
|
|
Consult us for special
temperature or pressure
ranges and high- vibration
resistant options.
Long term stability versions
are available. |
|
|
MECHANICAL
| Standard Temperature Ranges
|
30 °F - 130 °F
|
| Standard Pressure Ranges
|
300, 500, 1K, 2K, 3K, 5K PSI
|
| Non Standard Pressure Ranges
|
15, 25, 30, 50, 100, 150, 200, 250, 10K PSI
|
| Other ranges possible
|
Consult Factory
|
| Over Pressure (No change out of spec.)
|
2.0x Range
|
| Usable Pressure (Small change in balance)
|
3.0x Range
|
| Burst Pressure
|
6.0x Range
|
PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
|
A
|
B
|
C
|
D
|
Units |
|
Balance (Zero)
|
4.00
±0.50 |
4.00
±0.30 |
4.00
±0.20 |
4.00
±0.20 |
mA |
|
Full Scale Sensitivity
|
16.00
±0.50 |
16.00
±0.30 |
16.00
±0.20 |
16.00
±0.20 |
mA |
|
Output at 30 °F
|
4.00
±0.50 |
4.00
±0.30 |
4.00
±0.20 |
4.00
±0.20 |
mA |
|
Output at 130 °F
|
20.00
±0.50 |
20.00
±0.30 |
20.00
±0.20 |
20.00
±0.20 |
mA |
|
Static Error Band
|
±0.50
|
±0.25
|
±0.25
|
±0.25
|
%FS |
|
Thermal Balance (Zero) Shift
|
±0.02
|
±0.01
|
±0.01
|
±0.005
|
%FS/°F
|
|
Thermal Sensitivity Shift
|
±0.02
|
±0.01
|
±0.01
|
±0.005
|
%FS/°F
|
*BFSL=Best Fit Straight Line
ENVIRONMENTAL
|
Storage and Operating Temperature
|
0° -180°F
|
|
Compensated Temperature Range
|
30° - 130°F
|
|
Acceleration (Consult factory for high vibration options)
|
100g's any axis
|
|
Media Compatibility (wetted surface)
|
Liquids & Gases compatible with Titanium 6AL4V
|
|
Other Temperature Compensated Ranges
|
Consult Factory
|
ELECTRICAL
| Input Voltage (Standard)
|
24 VDC
|
| Input Load Resistance (Standard)
|
RL = 500 Ohms
|
| Maximum Input Voltage
|
30 V for short periods
|
| Insulation Resistance Minimum
|
50 MOhms @ 50 VDC
|
|
|
 |
|
|
|
|
|
Toll
Free: (888) 738-0039
E-mail: a-kast@on.aibn.com
Copyright © 2000 A-KAST
Measurements & Control Limited
|
|
